Brooklyn Belongil

Brooklyn Belongil

From $2,590.00

The Belongil shows off all that copper can be.  It is sold with either the Bundeena shower  (250mm Daintree Rose, Code BCCBS), or the Eden shower  (200mm Natura rose, Code BCCES) . A beautiful addition to any outdoor space. Can be customized with a footwasher if required.

When ordering:
For 250mm Daintree rose specify Belongil with code BCCBS
For 200mm Natura rose specify Belongil with code BCCES

Asymmetry at its best. It’s everybody’s favourite. Not everybody’s brave enough to choose it!

Clear



SKU: N/A

Categories: , ,

Specification Sheet

Code: BCBS

Shower Rose:
Natura 200mm dia
Daintree 250mm dia
Reach 500mm (centre to centre)
Height 2000mm

WELS:
Belongil Freestanding unit with Bundeena shower (Code BCCBS)
Flow Rate: 8.9L/min
WELS registration #

Belongil Freestanding unit with Eden shower (Code BCCES)
Flow rate: 7.9L/min
WELS registration #

Shower Standpipe:
Main pipe: 65mm dia
Goose neck to rose: 32mm dia
Overall Height: 2200mm
Tap Height: 910mm (approx to centre of taps)
Overall depth incl taps 140mm

* Stainless steel freestanding base (concealed) supplied

Please note:
Can be supplied freestanding or wall mounted- Please specify upon ordering Wall mounting on timber requires minimum 45mm depth timber blocking behind finished wall.

Final water connections in ground. Hot and cold water supply pipes to be extended to within 500mm of base of shower. Shower must be fully installed and connected prior to tiling (or other floor finishes) of area at the base of the shower.

To ensure baseplate is concealed, 60mm minimum is required between underside of tile and concrete slab. Concrete may need to be chased to achieve this depth Freestanding model must be fixed to either timber or concrete substrate.

Can be customised to add a hand held shower (at extra cost).

Click here for a downloadable PDF

Installation Guide

Installation of Tama, Lennox, Docklands or Belongil freestanding shower to concrete.

Click here for a downloadable PDF

OGA